Complete Roofing Solutions for Bonners Ferry
Everything we do is roofing. That focus means our Bonners Ferry crews install more roofs per year than companies that try to do siding, windows, and remodeling on the side.
Roof Replacement
Replacement cost depends on your roof size, pitch, and material choice. We quote by the square (100 sq ft) and itemize everything so you can compare apples to apples. In Bonners Ferry, most residential replacements fall between $8,500 and $24,000. We offer financing if that helps.
Get a Free Quote →Roof Repair
Most roof leaks in Bonners Ferry come from one of five places: pipe boots, step flashing at walls, valley flashing, damaged shingles, or failed seals around skylights. We find the actual source. Not just the drip point in your ceiling. And fix it right. Water travels along rafters and sheathing before it drips, so the leak location and the damage location are often 10 feet apart.
Get a Free Quote →Storm Damage Repair
Wind speeds above 60 mph cause shingle tab lift and adhesive seal failure per ASTM D7158 testing protocols. Our Bonners Ferry inspectors check the entire windward exposure. Not just the obvious damage. Poor ventilation causes ice dams which cause water intrusion under the shingle field during freeze-thaw cycles. We document all contributing factors so your insurance claim covers root-cause repairs, not just surface patches.
Get a Free Quote →New Roof Installation
New construction means we get to do everything right from scratch. No compromises, no working around someone else's mistakes. Ice and water shield where it belongs, properly lapped underlayment, correct nailing patterns, and ventilation sized to the space. That's a roof that lasts.
Get a Free Quote →Metal Roofing
Color options in metal roofing are virtually unlimited. Matte black, charcoal, forest green, copper penny, barn red, slate blue. We order custom colors from Sheffield Metals and McElroy Metal with 40-year fade warranties. Your house, your style.
Get a Free Quote →Shingle Roofing
The difference between a cheap shingle roof and a quality one comes down to the system underneath. Shingles are only the outer layer. Ice and water shield in the valleys, synthetic underlayment across the deck, proper starter strip with factory adhesive, correct nailing pattern. That's what makes a shingle roof last in Idaho's weather.
Get a Free Quote →Flat Roofing
TPO single-ply membrane is our most-installed flat roof system in Bonners Ferry. White reflective surface reduces cooling costs, hot-air welded seams are watertight, and 15-20 year manufacturer warranties are standard. Available in 45-mil, 60-mil, and 80-mil thickness.
Get a Free Quote →Commercial Roofing
TPO is our most-installed commercial membrane in Bonners Ferry. 60-mil thickness, hot-air welded seams, mechanically attached or fully adhered over polyiso insulation. The weld is stronger than the membrane. 15-20 year manufacturer warranties depending on system build-up.
Get a Free Quote →Gutter Installation
Gutter replacement in Bonners Ferry costs $8-$15 per linear foot installed. That includes hangers, end caps, outlet drops, miters, and at least two downspout runs. Copper is $25-$40 per foot. We give exact pricing in the estimate. No ranges.
Get a Free Quote →Roof Inspection
We don't inspect roofs from the ground with binoculars. We get on the roof. Every inspection includes a full walkthrough: shingle condition, flashing integrity, pipe boots, ridge vent, soffit ventilation, gutter function, and visible attic moisture signs. You get photos and a written report.
Get a Free Quote →Emergency Roof Repair
Storm, wind, hail, or fallen tree. We've handled every kind of roofing emergency in Bonners Ferry. First priority is always preventing further water damage to your interior. Second priority is documentation for insurance. Third is the permanent fix.
Get a Free Quote →Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →